Seal Once Nano Penetrating Wood Sealer

• Do not use if air or surface temperature is below 45°F/7.22°C or above 95°F/35°C.
• Do not apply in rain or when rain is expected within 12-24 hours.
• DO NOT THIN. Mix well. Stir contents or shake thoroughly prior to use.
• Test a small area to ensure acceptable appearance and penetration.
• Apply first coat with a synthetic brush; pump-up garden sprayer; air-assisted and/or airless sprayer. Use 15-17 tip and medium to coarse spray pattern. When spraying, always back brush for best results.
• Second coat can be applied once first coat has penetrated but is still damp. Second coat must be applied within one hour of applying first coat.
• Prepare surface by cleaning with Oxy All Wood Wash to remove any mold and mildew, UV damage and to open the pores of the wood for better penetration.
• Allow approximately 2-3 hours for surface to dry, depending on temperature and humidity.
• Allow 12-24 hours for full cure, depending on temperature and humidity.
• When recoating, apply as soon as previous coat has penetrated and surface is damp, not wet. Second coat must be applied within one hour of applying the first coat.

Coverage:

Approximate coverage: 250-350 sq. ft./gallon per coat. Based on surface porosity.