Oxy All Wood Wash

Description

Uses:

Use as a cleaner or as a preparation for staining or sealing wood. Works on Mahogany, Teak, Pine, Cedar, Fir, or pressure treated wood. Great on decks, fences, docks, lawn furniture, siding, wood shingles and shakes.

Not advised for Redwood.

Directions:

Add 125 ml of Oxy All Wood Wash (1/2 cup or 3 capfuls per gallon) to 4 L  of water. If available, warm water dissolves best. Mix well, stirring frequently, then allow the solution to fully activate for 15 minutes before use. Clean in small enough sections that can be kept wet. Apply the solution with a garden style hand pump sprayer, scrub with a stiff deck brush, then rinse with fresh water and move onto the next
section. Note that if the wood is painted or previously stained and the coating is in poor shape, Oxy All Wood Wash may lift worn spots. If in doubt, it is always good to test in an inconspicuous spot.

Avoid letting overspray dry on glass as it leaves a difficult to clean residue.

Active ingredient: hydrogen peroxide

Coverage: